Modu-Laser.com

 

Power Measurement

The LPM-LS (StarLite) is a low cost laser power / energy meter (Ophir-Spiricon # 7Z01565) that provides both digital and analog screen displays. A compact, handheld unit, displays a variety of beam measurements, including power, single shot energy, energy and frequency of high repetition rate lasers, and beam size. The meter provides a large 320×240 pixel display with 16mm digits for increased legibility, and monitors power from pWto many kWor energy from pJ to hundreds of Joules.


The LPM-VG (Vega) is is the most versatile and sophisticated handheld laser power/energy meter on the market (Ophir-Spiricon # 7Z01560). Just plug in one of the many Ophir sensors and you have a whole measurement laboratory at your fingertips. Measures power from pJ and pW to hundreds of Joules and thousands of watts. The Vega has many on board features such as laser tuning, data logging, graphing, normalize, power or energy density units, attenuation scaling, max and min limits. The built-in USB and RS232 interfaces and StarLab and StarCom PC software allow on-line processing of data or processing previously stored data; results are displayed graphically on a PC. To support PC interfacing, LabVIEW drivers, COM Object Interface and ActiveX controls are provided.


The LPM-USB (Juno) is a very compact smart module which turns your PC or laptop into a full fledged Ophir laser power/energy meter. Just install the software, plug any Ophir smart sensor into the Juno module and connect the Juno with a standard USB cable to the PC USB port.


The LPS-30 is a broadband thermopile type laser power sensor (Ophir-Spiricon # 7Z02621) for measuring laser power levels from 30mW to 150W. Compatible with both the LPM-SL and LPM-VG Laser Power / Energy Meters.


The LPS-3A is a broadband thermopile type laser power sensor (Ophir-Spiricon # 7Z02621) for measuring laser power levels from 60uW to 3W. Compatible with both the LPM-SL and LPM-VG Laser Power / Energy Meters.